Guntermann & Drunck CATCenter X systems Operation - Manual (Page 29)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 29
In this case, press one of the keys that activates the StepScan. The
StepScan then starts with either the last or the first channel.
3.3.2 Identifying the StepScan Function
Activation of the StepScan function is shown by " STEPSCAN " on the display.
Example:
Win 2000 (Computer name, editable)
CATCenter (Switch name, editable)
STEPSCAN (Active step function)
3.3.3 Canceling the StepScan Function
To cancel the function, access AdonIS ( CTRL + NUM ) or select a target using
a hotkey.
The STEP display disappears.
3.4 Canceling the Connection to a target
Carrying out the DISCONNECT function cancels the connection from your
console to a selected target. This ensures that a console that is not in use is
not accessing any targets and that the targets are therefore available to all
consoles.
To activate the DISCONNECT function, carry out the following steps:
1. Access AdonIS by pressing the key combination (default): CTRL
+ NUM
2. Access the OPERATION menu by pressing the F9 key.
3. Move the cursor to the entry "DISCONNECT" and press the
ENTER key or the D key.
Alternatively, the function can be called from the SELECT menu using the
hotkey combination
CTRL + D .
After carrying out this function, the connection to the last active target is
cancelled and you return to the SELECT menu.
Caution! DISCONNECT does not protect your console against unauthorized
access!