Guntermann & Drunck CATCenter X systems Operation - Manual (Page 77)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 77
 A target is turned off.
 A target no longer exists on a CPU interface.
 A CATpro2 no longer works.
Now use the UP ARROW and/or DOWN ARROW keys on your keyboard or
the mouse to select the entry MOVE TARGET INFO submenu and then press
ENTER . The target information is then transferred to the new CATpro2.
5.3.3 Deleting a Target
If you remove a CATpro2 from a CPU interface because the connected target
no longer exists, the corresponding entry remains in the SELECT menu and
the TARGET MANAGEMENT submenu. It is displayed in
RED.
You can delete this entry from the TARGET MANAGEMENT submenu
therefore from the CATCenter system.
To do so, use the
UP ARROW and/or DOWN ARROW keys on your keyboard
or the mouse to select the corresponding entry in the TARGET
MANAGEMENT submenu and then press the
F4 key.