HB Optoelectronic HBP200 - Manual (Page 12)

HBP200 DLP Pico Projector User Guide
10
Note: LED Indicator will tell you the operating status of the projector.
Description
Normal Usage
 Blinking — The LED blinking will last for about 5-6 seconds while the
projector has been switched on.
 On —The projector is ready to use after boot up sequences are completed.
 Off —The projector has been switched off.
Abnormal Status
 Blinking — Circuit Protection: The LED indicator will be blinking when the temperature
of the projector is too high. You will see a warning message as below. The indicator will
be blinking for 10 seconds and then the projector will be off.
Circuit Protection Warning Message