HiTi P720L - Manual (Page 22)

English
HiTi P720L user manual
Chapter 5. Error Message Handling
5 - 4
1. Stick the broken part of the ribbon with a tape.
In case of power supply interrupted while the printing, the Thermal Head will be kept on pushing
to Platen. Leaving this situation for a long time, the shape of Platen can be warped. In order to
avoid this situation, please follow the instruction below.
1. Turn off the power of the printer.
2. Turn on the power for 3 or more seconds after turning off the power.
3. Paper Jam is displayed on the LCD of the operation panel, open the front cover and take the
necessary action according to the instruction provided in 5-3, "Paper Jam".
ƦPower Supply Interrupted during Printing
ƦWhen the ribbon is snapped
2. Turn the ribbon on the rewinding side and
rewind the taped section completely and tightly.