Hummer 2007 H3 - Manual (Page 218)

Playing a Specific Loaded CD
For every CD loaded, a number appears on the
display. To play a specific CD, first press the
CD button, then press the numbered pushbutton
that corresponds to the CD. A small bar appears
under the CD number that is playing and the
track number appears on the display.
If an error appears on the display, see
“CD Messages” later in this section.
Z (Eject): Press this button to eject CD(s).
To eject the CD that is currently playing, press
and release this button.
To eject multiple CDs, do the following:
1. Press and hold the CD eject button for
five seconds.
A beep sounds and the indicator light,
located to the right of the slot, begins to
flash and EJECT ALL displays.
2. Once the light stops flashing and turns
green, REMOVE CD # displays. The
CD ejects and can be removed.
Once the CD is removed, the indicator light
begins flashing again and another CD ejects.
To stop ejecting the CDs, press the LOAD
or the eject button.
If the CD is not removed, after 25 seconds,
the CD automatically pulls back into the player.
If CD is pushed back into the player, before
the 25 second time period is complete, the player
senses an error and tries to eject the CD
several times before stopping.
Do not repeatedly press the CD eject button to
eject a CD after you have tried to push it in
manually. The player’s 25-second eject timer
resets at each press of the eject button, causing
the player to not eject the CD until the 25-second
time period has elapsed.
r (Reverse): Press this button to reverse within
the track.
[ (Fast Forward): Press this button to fast
forward within the track.
N (Repeat): With repeat, one track or an entire
CD can be repeated.
218