Spare tire – Hummer 2007 H3 User Manual

Page 405

Advertising
background image

4. Reinstall the wing nut retainer to fasten the

jack and tool bag in the storage compartment.

Make sure that the wing nut passes through
the tool bag and the jack before you tighten it.

5. Turn the wing nut retainer clockwise to secure.

6. Reinstall the compartment cover by inserting

the locator tabs in the holes in the swing-gate.
Push the latches down to secure.

Spare Tire

Your vehicle, when new, had a fully-inflated spare
tire. A spare tire may lose air over time, so
check its inflation pressure regularly. See
Inflation - Tire Pressure on page 375 and Loading
Your Vehicle
on page 289 for information
regarding proper tire inflation and loading your
vehicle. For instruction on how to remove, install
or store a spare tire, see Removing the Flat
Tire and Installing the Spare Tire
on page 396
and Storing a Flat or Spare Tire and Tools
on page 403.

After installing the spare tire on your vehicle,
you should stop as soon as possible and make
sure the spare is correctly inflated. Have the
damaged or flat road tire repaired or replaced as
soon as you can and installed back onto your
vehicle. This way, a spare tire will be available in
case you need it again.

Do not mix tires and wheels of different sizes,
because they will not fit. Keep your spare tire and
its wheel together.

405

Advertising