Hummer 2007 H3 - Manual (Page 393)

Removing the Spare Tire and Tools
The equipment you will need is located in the
swing-gate, behind a cover. To remove the
equipment, do the following:
1. Open the swing-gate. See Swing-gate on
page 95 for more information.
2. Remove the cover, located on the inside of
the swing-gate, by lifting the two latches.
3. Turn the wing nut counterclockwise to release
the jack tool bag and jack.
4. Remove the tool bag and jack from its
compartment.
5. Undo the straps that secure the jack tool bag
to the jack.
393