Vehicle personalization, Memory seat, Vehicle personalization -51 – Hummer 2004 H2 User Manual

Page 131: Memory seat -51

Advertising
background image

Vent: The vent position allows you to open the rear
of the sunroof by tilting it upward. To use the vent
position, start with the sunroof in the fully closed
position, then press and hold the front side of the
switch until the sunroof reaches the desired
vent position or until it stops moving. To close the
sunroof from the vent position, press and hold
the rear side of the switch until the sunroof is fully
closed.

Do not to leave the sunroof open for long periods of
time as debris may collect in the tracks.

Sunshade Operation

The sunshade will open automatically when opening the
sunroof.

To adjust the sunshade, pull it backward or forward to
the desired position. The sunshade can not be
closed further than the current closed position of the
sunroof.

Although the sunshade opens automatically when
opening the sunroof, it must be manually pulled closed
after closing the sunroof.

Vehicle Personalization

Memory Seat

If your vehicle has this
feature, the controls for the
memory function are
located on the driver’s door.

These buttons are used to program and recall memory
settings for the driver’s seat, both the driver’s and
passenger’s outside mirror, the radio station presets,
and the previously used climate control system settings.
The settings for these features can be personalized
for both driver 1 and driver 2. Driver 1 or driver 2
corresponds to the memory buttons labeled 1 and 2 on
the driver’s door and the numbers on the back of
the remote keyless entry transmitters.

2-51

Advertising