Hummer 2004 H2 - Manual (Page 288)

Power Winch Platform (If Equipped)
You can use the power winch platform with an
aftermarket winch. Connect the winch to the platform
and wiring to the vehicle following the winch
manufacturer’s guidelines.
1. Slide the winch platform into the front receiver of
your vehicle. To secure it, follow the next step.
You will be using the locking pin (if equipped) stored
with the jack/tool kit. See Changing a Flat Tire on
page 5-79 for more information on location.
2. Slide the pin down through the hole in the front
bumper and into the receiver.
If you look under the
receiver, you will see the
locking portion (clip) of the
pin coming through the
bottom hole in the receiver.
3. Turn the clip so that it is
perpendicular to the
pin. Pin is shown off the
vehicle for clarity.
4-62