Turn signal/multifunction lever, Turn signal/multifunction lever -6, Turn – Hummer 2004 H2 User Manual

Page 140: Signal/multifunction lever

Advertising
background image

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:

Turn and Lane Change Signals

Headlamp High/Low-Beam Changer

Flash-to-Pass

Windshield Wipers

Windshield Washer

Cruise Control

For information on the exterior lamps, see Exterior
Lamps
on page 3-13.

Turn and Lane Change Signals

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.

To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.

An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.

As you signal a turn or a lane change, if the arrows
flash more quickly than normal, a signal bulb may
be burned out and other drivers won’t see your turn
signal.

3-6

Advertising