Hummer 2004 H2 - Manual (Page 133)

Easy Exit Seat
The controls for this memory function are located on the
driver’s door.
B
(Easy Exit Seat): This button is used to program
and recall the desired driver’s seat position when
exiting/entering the vehicle. The seat position, can be
personalized for both driver 1 and driver 2.
To store the seat exit position for driver 1 or 2, do the
following:
1. Press and release the 1 or 2 button or press the
unlock button on the desired remote keyless entry
transmitter. The seat will move to the stored
memory position.
2. Adjust the seat to the desired exit position.
3. Press and hold the exit button of the memory
control for three seconds. A double chime will sound
to let you know that the position has been stored
for the identified driver (1 or 2).
To use the seat exit position, do one of the following:
• Press the exit button on the memory control.
• Or, if this feature is activated in the DIC, then
remove the key from the ignition; the seat will then
move to the exit position.
See DIC Operation and Displays on page 3-44 for more
information on activating this feature in the DIC.
2-53