Hummer 2004 H2 - Manual (Page 289)

4. Push the clip so it
locks in place. Pin is
shown off the
vehicle for clarity.
5. With the clip locked
and the pin secure,
your setup should look
like this if you look
under the receiver. The
pin is now secure
and you will be able to
use the winch.
To remove the winch platform, you must first unlock the
clip so you can pull out the pin. To unlock the clip,
squeeze the clip and turn it so it is in line with the rest
of the pin. Remove the pin and slide the winch platform
out from the receiver.
Notice: Do not use the winch platform to winch at
a tension of more than 9,000 lbs. (4 082 kg). This
would damage your vehicle’s frame. This damage
would not be covered by your vehicle’s warranty.
4-63