IDK VAC-1000HD - Manual (Page 26)

VAC-1000HD User’s Guide
26
7.2.6 [F20] Setting Deep Color
You can set the Deep Color (color depth) that is output from the source device.
Setting values
08: 24bit/pixel (8bit/component) [Default]
10: 30bit/pixel (10bit/component)
12: 36bit/pixel (12bit/component)
Notes:
● If you select “30bit/pixel (10bit/component)” or “36bit/pixel (12bit/component)”, the transmission clock will
be faster resulting in noise on video when a poor-quality cable or long cable is connected. In this case,
change the setting to “24bit/pixel (8bit/component)”.
● This is enabled only if one of 03 to 22 is selected for the EDID resolution.
7.2.7 [F22] Setting PCM Audio
You can set the maximum sampling frequency of PCM Audio that is output from the source device.
Setting values
32: 32 kHz
44: 44.1 kHz
48: 48 kHz [Default]
88: 88.2 kHz
96: 96 kHz
192: 192 kHz
Notes:
● Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your devices.
● This is enabled only if one of 03 to 22 is selected for the resolution setting of EDID.
7.2.8 [F24] Setting AC-3 Dolby Digital Audio
You can set the maximum sampling frequency of AC-3 Dolby Digital Audio that is output from the source
device.
Setting values
32: 32 kHz
44: 44.1 kHz
48: 48 kHz
oFF: OFF [Default]
Notes:
● Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your device.
● This is enabled only if one of 03 to 22 is selected for the resolution setting of EDID.