11 [f30] setting dts audio, 12 [f32] setting dts-hd audio, F30] setting dts audio – IDK VAC-1000HD User Manual
Page 28: F32] setting dts-hd audio
VAC-1000HD User’s Guide
28
7.2.11 [F30] Setting DTS Audio
You can set the maximum sampling frequency of DTS Audio that is output from the source device.
Setting values
32: 32 kHz
44: 44.1 kHz
48: 48 kHz
96: 96 kHz
oFF: OFF [Default]
Notes:
● Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your device.
● This is enabled only if one of 03 to 22 is selected for resolution setting of EDID.
7.2.12 [F32] Setting DTS-HD Audio
You can set the maximum sampling frequency of DTS-HD Audio that is output from the source device.
Setting values
44: 44.1 kHz
48: 48 kHz
88: 88.2 kHz
96: 96 kHz
176: 176.4 kHz
192: 192 kHz
oFF: OFF [Default]
Notes:
● Some LCD monitors do not support some audio formats. Select the audio format and sampling frequency
supported by your device.
● This is enabled only if one of 03 to 22 is selected for resolution setting of EDID.