IDK VAC-1000HD User Manual
Page 43
VAC-1000HD User’s Guide
43
*1
xvYCC, Lip Sync, 3D, ARC, and HEC are not supported. CEC: Pass through between IN and OUT 6
*2
Analog audio output only supports 2-channel linear PCM.
*3
The transmission distance depends on connected devices. The distance above is the maximum transmission distance when a
cable made by IDK (AWG24) is used and signals, 1080p 60 Hz 24 bit/pixel (8 bit/component), are input or output. If the connected
device is not matched to the VAC or if other makers' cables are used, video signals can be unstable or video signals cannot be
output, even though the transmission distance is within the information above.
*4
Anti-snow function automatically eliminates snowy noise that is a specific symptom of the signal having HDCP. This feature
automatically eliminates the snow noise causing mainly at start-up of the device. If the noise occurs in the input signals or if the
noise is caused by bad-quality signal transmission, this feature does not work.
*5
The connection reset feature automatically fixes problems that can normally be solved by removing and inserting connectors. Users
do not have to remove and insert connectors in order to utilize this feature. This feature works only for the VAC’s output. If other
devices are connected between the VAC’s output and display device, this feature may be invalid.
Notes:
● Specifications are subject to change without notice.
● All nominal levels are at ±5%.