IDK HDC-H100-C - Manual (Page 13)

HDC-TH100-C/HDC-RH100-C User’s Guide
13
5 Connecting external devices
5.1 Preparation
Before connecting an external device, such as a source device and the sink device, please prepare the
required cables.
● 2 m/6.56 ft. or shorter HDMI cable (Type A 19 pin plug)
● Twisted pair cable for extension (UTP/STP cable meeting Cat5e/Cat6)
● LAN cable meeting 10Base-T/100Base-TX
● RS-232C cable (D-sub9 pin, female)
■ HDMI cable: 2 m/6.56 feet or shorter HDMI cables with Type A (male) connector whose pins are
configured correctly
[Flexible cable]
For input/output cable, please use one of the following cables.
Model number Length
HDSS-005 0.5 m/1.64 ft.
HDSS-01 1.0 m/3.28 ft.
HDSS-02 2.0 m/6.56 ft.
[Conversion cable]: HDMI-DVI conversion cable
Model number Length
HDSS-DMHM-005 0.5 m/1.64 ft.
HDSS-DMHM-01 1.0 m/3.28 ft.
HDSS-DMHM-02 2.0 m/6.56 ft.
■ Twisted pair cable for extension: UTP/STP cable meeting Cat5e/Cat6 standard
[See “6.1.2 RJ-45 connector”]
■ LAN cable: meeting 10Base-T/100Base-TX standard
100-Mbps Ethernet signals can be transmitted over a long distance.
[See “6.1.2 RJ-45 connector”]
■ RS-232C cable: D-sub 9 pin, female
RS-232C signals (115.2 Kbps at a maximum) can be transmitted in duplex over a long distance.
Select a cross cable or straight cable according to the connected devices.
[See “6.1.3 RS-232C connector”]