ILS ILS22GS win7/8 - Manual (Page 13)

The ILS22 has build-in relays for control functions.
By default, relay 22 and relay 23 are reserved for driving the motor in the optional electrical
pedestal from ILS (supplied with the ILS22G).
One can define the number of seconds the relays will be closed (number of seconds for
up/down movement). Default is 2 seconds.
If under direct control of the lectern (ILStranslator), the following form will show up.
Via Powerlift Calibration you can specify (‘Mark’) the lowest setting, which in turn will be
used to provide a calculated indication in ILStranslator (and Remote-Q) what the current
height is calculated in cm’s and inches.
This calculated indication is shown in ILStranslator/Extra Buttons.