ILS ILS22GS win7/8 - Manual (Page 16)

Note: There might be later Powerlift engines which go lower or higher, or have a different
rise-time from lowest to highest measured in seconds (current Powerlift installations go from
lowest 89 cm to highest 114 cm in 17.5 seconds roughly). If in doubt, use Alt_A or the menu
Adapt entry to change your findings.
While being present at the ILS22 lectern, hit the Down button in this ILS22Setup wizard, until
the motor stops and will not allow to go lower. Based on the measured lowest position, you
can still adapt lowest, highest and rise-time values.
Hit the Mark lowest button and the following form will come up to allow you to adjust to an
initial height.
Hit the Down or Up buttons to elevate the pedestal into a required default position. The
approximate height values will be adjusted accordingly.
Hitting Next will show the Load Extra Buttons window: