ILS ILS22GS win7/8 User Manual
Page 6
In the above form you can specify the number of milliseconds to wait before the comm. port
gets active after opening it. If the internal PC is used, comm. ports may open successfully in
just 250 milliseconds. With an external PC it may take longer. This entry allows to fine tune
the system and has an impact on the ILStranslator start-up time.
Remote control.
If you want ILStranslator to also listen and allow control besides the direct glass plate buttons,
keep that possibility open by selecting the second option.
Note: Select the second option if you also obtained Remote-Q.
Select which Comm port on the ILS22 you want to use and the Baudrate to operate at. Default
is 19200 baud, but here you can increase that depending on your remote control hardware
capabilities.
Note: With a modern PC or laptop you should be able to successfully communicate at 115200
baud or higher.