ilve Built-in Cooktop - Manual (Page 8)

Before installing and operating the hotplate, read these instructions completely and carefully.
IMPORTANT To be installed only by an authorised person
- Remove all packaging material and literature from the hotplate before connecting the gas and electrical
supplies
INSTALLATION
– Observe all governing codes e.g. AS5601, council ordinances and local authority rules.
- The hotplate must be installed by an authorised person
- The hotplate must be grounded
- Save these instructions for the local inspectors use
TO THE INSTALLER
– After connecting the gas supply, turn on the gas and check for leaks at all joints with soapy water or
other approved methods
UNDER NO CIRCUMSTANCES USE A NAKED FLAME IN CHECKING FOR LEAKS. NOT FOR USE
IN MARINE CRAFT, CARAVANS OR MOBILE HOME UNLESS EACH BURNERS IS FITTED WITH A
FLAME SAFE GUARD
safety precautions
Buil
t-in cooktops
8 ILVE Built-in Cooktop Operating & Installation Manual