Interlink Electronics VersaPad USB - Manual (Page 21)

USB VersaPad®
Integration Guide
www.interlinkelectronics.com
19
9.0 Orderable Part Numbers
 Hardware Development Kit, 54-00007
 VersaPad USB Module with FFC Connectors
 VersaPad USB Module with Molex board to Wire Connectors
 VersaPad USB Demo with Cable
 Demo Model Graphic Overlay
 12 inch Wire Cable Harness
 2
FFC Cables
 3
FFC Connectors
 1 USB Flash Drive with Product Literature
 VersaPad USB Datasheet
 VersaPad USB Integration Guide
 VersaPad USB Module with FFC Connectors (54-00030)
 VersaPad USB Module with Molex Board to Wire Connectors (54-00031)
 VersaPad USB Module with FFC All features Disabled (54-00061)
 VersaPad USB Module with Molex All features Disabled (54-00063)
 12 inch Wire Cable Harness (14-16576)
 USB Cable Assembly (14-00054)
 USB Cable Assembly with Strain Relief (14-00108)
10.0 Intellectual Property & Other Legal Matters
Interlink Electronics holds several domestic and international patents for its Force Sensing
Resistor technology. FSR, Force Sensing Resistor, and VersaPad are company trademarks. All
other trademarks are the property of their respective owners.
The product information contained in this document provides general information and
guidelines only and must not be used as an implied contract with Interlink Electronics.
Acknowledging our policy of continual product development, we reserve the right to change,
without notice, any detail in this publication. Since Interlink Electronics has no control over the
conditions and method of use of our products, we suggest that any potential user confirm their
suitability for their own application.