JLCooper MCS3 USB - Manual (Page 29)

29
Alert During Clicks, Drags and Scrolls
When Capture Coordinates is checked, MCS
3
remembers the
pointer coordinates when you first pressed the key or turned
the wheel within the target application. A mouse click is
occurs, and the MCS
3
remembers the name of the window in
which the click occurred.
So the next time you press a key or turn the wheel, the MCS
3
will "look for" the name of the window in which the pointer
coordinates were first captured, and produce a click.
It is also possible that the window name has been changed.
If you press a key or turn the wheel and the name of the
window has been changed since the click was first captured,
you will see a message like this.
The original window name and the new window name are
shown. Click Cancel to cancel the click. Click OK if you want
to replace the window name with the new window name.
The click, drag, or scroll will occur in the new window.