Ge ner a l oper a tion, Activating setting mode, Adjusting midi channel – Kawai ATX2-p User Manual
Page 21: Deactivating setting mode
21
G
e
ner
a
l Oper
a
tion
The MIDI Channel function is used to determine on which MIDI channel the AnyTimeX2 piano will exchange
MIDI information with external MIDI devices and instruments.
The selected channel will function as both the Transmit and Receive channel.
Activating Setting Mode
While holding the Soft pedal, press and
hold the top-most ‘C’ key (C8 key)
Release the Soft pedal,
then release the ‘C’ key
Depress the Soft pedal
The above combination of holding the Soft pedal while pressing the top-most ‘C’ key will activate Setting Mode.
Adjusting MIDI Channel
Press white C3 to D5 keys to adjust the MIDI channel.
Please refer to the table below for a list of MIDI channels and the respective key assignments.
MIDI channel (OMNI OFF)
OMNI ON 1ch
Key
C3
D3
E3
F3
G3
A3
B3
C4
D4
E4
F4
G4
A4
B4
C5
D5
MIDI Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
* The MIDI channel can be adjusted within the range of 1-16.
* Press black C#3 key to allow MIDI information to be received from all channels.
This is often referred to as ‘OMNI ON’. If, a specifi c MIDI channel is selected, the AnyTimeX2 piano will be set to ‘OMNI OFF’ and data will only be
received on that specifi ed channel.
Deactivating Setting Mode
After adjusting the desired MIDI channel settings, depress the Damper pedal to deactivate Setting Mode.
* The MIDI channel setting will be set to ‘OMNI ON 1ch’ automatically when the power is turned on.