Kawai ATX2-p - Manual (Page 25)

25
Ap
p
e
n
d
ix
MIDI Implementation Chart
 KAWAI Model ATX2-p
Date : JAN 2014 Version : 1.0
Function Transmit Receive Remarks
Basic channel
At power-up 1 1
Settable 1 - 16 1 - 16
Mode
At power-up Mode 3 Mode 1 ** Omni mode is on at power-up.
Omni mode can be turned off
through MIDI channel setting
operations.
Message  Mode 1, 3**
Alternative  
Note number
21 - 108* 0 - 127
* 9 - 120, including transpose
Range  0 - 127
Velocity
Note on  9nH v=1-127 
Note off  8nH v=64 
After touch
Key specifi c  
Channel specifi c  
Pitch bend  
Control change
7   Volume
64  (Right pedal)  Damper pedal
66  (Left pedal)***  ***Sostenuto pedal 1
67  (Left pedal)  Soft pedal
Program change settable range
 (0 - 12) 
 0 - 12
Exclusive  
Common
Song position  
Song selection  
Tune  
Real time
Clock  
Commands  
Other functions
Local On / Off  
All notes Off   (123 - 127)
Active sensing  
Reset  
Remarks
1 Notes : Control Change #66 will function only when the Soft/Sostenuto pedal is set to ‘Sostenuto
Pedal’ mode (see page 9).
Control Change #67 will function only when the Soft/Sostenuto pedal is set to ‘Soft Pedal’
mode (default).
Mode 1: omni mode On, Poly Mode 2: omni mode On, Mono  : Yes
Mode 3: omni mode Off , Poly Mode 4: omni mode Off , Mono  : No