Kleenmaid OMF6020 - Manual (Page 14)

14
Drip pan insertion (removable guide rails
version)
CAUTION use specific hand protection devices if these
operations are performed with a hot oven, as the drip pan
can be very hot.
With the sliding guides fully inside the oven, insert the drip
pan by making the rear side rest at approximately half the
length of the slides, and keeping its front slightly lifted
(fig.1p).
In this position, push the drip pan until the guide rear end
stop is reached; now, put into place the entire drip pan
(fig.2p).
Make sure that the grill front is placed inside the end stops
of the sliding guide rail (fig.3g).
To remove the grill pan, pull it towards you and leave it on
the side sliding guides until they are fully removed; then,
lift it by holding it firmly.
Make sure that the holes of the drip pan front are placed
inside the end stops of the sliding guide (fig.3p).
To remove the drip pan, pull it towards you and leave it on
the side sliding guides until they are fully removed; then,
lift it by holding it firmly.
GRILL INSERTION (REMOVABLE GUIDES VERSION)
CAUTION use specific hand protection devices if these
operations are performed with a hot oven, as the grill can
be very hot.
With the sliding guide rails fully inside the oven, insert
the grill by making its rear (side with the rear rod) rest
at approximately half the length of the guide rails, and
keeping its front slightly lifted (fig.1g).
In this position, push the grill until the rear end stop is
reached; now, put into place the entire grill (fig.2g).