Kleenmaid OMF6020 - Manual (Page 4)

4
For installation of the oven see the “installation
instructions” chapter
Correct use of the oven
– Pre-heat the oven for the strictly necessary time only
– Open the door only when necessary to avoid
unnecessary heat losses
– Keep the gaskets clean and efficient to avoid heat
dispersion which can cause damage
– Always turn off the oven when no longer in use
– To reduce the formation of condensate owing to the
humidity in food, it is always necessary to pre-heat
the oven before introducing the foodstuffs. However
formation of condensate on the door glass or on the
walls of the oven does not compromise its functioning
and will tend to disappear with the cooking.
Prior to oven commissioning:
Switch off the power supply to the appliance.
Remove all internal packaging and accessories from
the oven. Clean the internal surfaces with hot water
or neutral detergent (see “maintenance and cleaning”
paragraph). Rinse thoroughly with a damp cloth. Wash
all oven accessories in the same way and dry everything
thoroughly.
Attention:
– Never use this device to warm the premises
– Do not obstruct the passage of cooling air by blocking
the ventilation holes of the room and ducts on the
appliance.
– Before installation, check that the local power supply
is compatible with the data indicated on the product
label.
– During use, do not touch the heating elements inside
the oven.
– The accessible parts can become very hot during use,
it is recommended to keep children out of reach.