Kleenmaid OMF6020 - Manual (Page 16)

16
Assembly/replacement of the power
supply cable
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
The electric cable must be kept locked to the terminal box
by the cable fix, so that it cannot come out. Connect the
line cable to terminal
L, the neutral cable to terminal N
and the yellow/green cable to the earth terminal . The
yellow/green cable must be longer than the other two by
at least 20 mm.
Ensure the electric cable does not pass near or come into
contact with the surfaces reaching a temperature above
75°C.
Earth connection
Installation, connection and earthing of the electric system
must comply with the Australian standard requisites and
meet the provisions of the local Standards in force.
This household appliance requires an earthing
connection for protection against short-circuits or
other electrical faults. It must, therefore, be connected
via appropriate electric wiring and isolating switch.
ATTENTION:
DISCONNECT THE ELECTRIC POWER SUPPLY
BEFORE PERFORMING TECHNICAL ASSISTANCE
OR MAINTENANCE ON THE PRODUCT.
In case of replacement of the electric cable, ensure the use
of an electric cable certified according to the Standards in
force and suitable to the technical features of the product.
Use only flexible cables:
cable type H05RR-FH 3 x 1.5, H05VV-F 3G1.5
Technical assistance and spare parts
Spare parts
Only authorised components can be used for the appliance
repairs. Do not repair or replace any oven component
not recommended by this manual. All interventions and
repairs must be carried out by authorised technical staff.
To request a spare part, indicate the following data:
1) Model of oven (MOD.) and production number (N.L.),
found on the product label positioned on the lower front
part of the oven and on the first page of the booklet.
2) Description and number of the spare part, technical
information available only to the authorised assistance
service.
3) Last, indicate the details of the distributor that sold
the oven and the details of your nearest after-sales
assistance centre.
Technical assistance
In case your oven requires technical assistance and/or
spare parts, contact the dealer or the authorised technical
assistance centre nearest to you.
In this case also it is necessary to state all the appliance
data on the aluminium product label, such as: model
(MOD) lot number (N.L.), etc, label placed on the lower part
of the oven facade or on the first page of the instructions
booklet.