Standard Horizon HX-471S - Manual (Page 19)

HX471S Page 17
4.2 CONNECTING A GPS TO THE CD-25
The CD-25 is supplied with a cable that is designed to be connected to any
GPS that has an NMEA Output with the GLL, GGA, GNS, or RMC sentences.
Check with the owner’s manual of the GPS to confirm this information. The
NMEA wires are located underneath CD-25. Remove the round white plate
from the CD-25 to expose the NMEA wires for connections to a GPS.
Blue – NMEA Input (Connects to NMEA Out of GPS)
Green – NMEA Negative (Connects to NMEA Negative or battery Ground of GPS)
If you have further inquires, please feel free to contact us at:
Phone: (800) 767-2450
Fax: (714) 527-9031
Web site: standardhorizon.com
Email: [email protected]
To connect to a GPS receiver, please use the above chart that will help you
connect the wires between the CD-25 and the GPS. Insure that the wires
are properly shielded from wa-
ter. See the figure at the right
for example of connection to
STANDARD HORIZON GPS
CHART PLOTTER.
Manufacturer/Model
Lowrance Portable
Magellan Fixed Mount
Magellan Portable
Northstar
Raytheon 420
Raytheon 520 / 620
Raytheon RL SERIES
Simrad
Sitex Neptune, Nautilus
Wires
Orange
Black (GND)
Gray
Black (GND)
Orange
Black (GND)
Yellow
Black (GND)
Yellow
Brown
Blue
Brown
White
Brown
White
Brown
Gray
Brown
HX471S (CD-25)
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Wires
Green
Brown
White
Blue
White
Black
Blue
Black (GND)
Brown
Black (GND)
Yellow
Green
Green
Black
White
Black
White
Black (GND)
Manufacturer/Model
Furuno GP30, 36
Furuno GP1650, 1850
Garmin Fixed Mounts
Garmin Portables
JRC GPS500
JRC 100 SERIES
JRC 200 SERIES
Lowrance Fixed Mount
HX471S (CD-25)
Green
Blue
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
STANDARD HORIZON
CP150, CP160 and
CP-170C