Standard Horizon HX-471S - Manual (Page 44)

HX471S Page 42
DW DISPLAY
Function: Selects the Dual Watch scanning display mode.
Available Values: Normal / Special
Default: Special
When “Special” is selected the channel shown on the display is the last
channel the HX471S received a call on. This is a handy feature if you cannot
look at the radio the moment a transmission was received
BAND ICON
Function: Enable/Disable
the BAND Icon display
Available Values: ON / OFF
Default: ON
LAMP MODE
Function: Selects the Lamp illumination method for the LCD/Keypad.
Available Values: Key / Toggle / 5 sec
Default: Key
Key: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
Toggle: Pressing the LAMP key toggles the LCD/Keypad lamp On/Off.
5 sec: Pressing the LAMP key illuminates the LCD/Keypad for 5 seconds.
MMSI REG
Function: Stores MMSI ID code.
Note: The MMSI can only be inputted twice. If entered more than twice, the
HX471S will have to be sent to STANDARD HORIZON factory service to
reset the MMSI.
MUTE
Function: Enable/Disable the Audio Muting on the FM Broadcast Band.
Available Values: ON / OFF
Default: ON
SCAN DISPLAY
Function: Selects the Scanning display mode
Available Values: Normal / Special
Default: Normal
When this menu is set to “Normal,” the channel numbers during scan will be
shown as scrolling on the display. When Special is selected the channel
numbers on the display do not change unless a call was received. The chan-
nel shown is the last channel that was received.
BAND ICON “OFF” BAND ICON “ON”