Entel HT952 ATEX PMR - Manual (Page 22)

21
Programming your HT953 radio
The radio’s frequency and tone configuration can be changed in user programming mode. This
will allow you to put any of the standard frequencies or tones in to any channel position. When a
radio has been configured this information can be quickly and easily cloned into other units using
an optional cloning cable.
Checking the current configuration
•
The display will show the selected channel,
the PL/DPL tone and the frequency.
Changing the assigned frequency
•
Press the top side function button to
highlight the frequency field. Turn top rotary
control to change the frequency. Press PTT
button to save the selection. Frequency
table is on P.15).
Changing the assigned tone
•
Press the top side function button to
highlight the tone field. Turn top rotary
control to change the tone. Press PTT
button to save the selection. (Pressing the
lower side function button whilst turning the
rotary control will change the selection in
increments of 10.)
Check / Modify the Frequency/Tone
To put radio into user programming mode
•
To put the radio into user programming
mode, press and hold the top side function
button and PTT button and turn the radio
on.
•
The radio will emit a beep to
confirm “user programming mode” has
been entered.
HT953