Entel HT952 ATEX PMR - Manual (Page 24)

Radio cloning allows you to copy the programmed channel and button setup information from a
‘master’ radio into other unprogrammed radios without the use of a PC. Cloning is performed
by connecting two radios together using a HTCL cloning lead.
How to clone a radio
Connect the HTCL lead to the accessory socket on both radios. Ensure the master radio is
powered up before the slave radio.
Master & Slave Radio
To put the radios into clone mode, press the lower side function button and turn radio on. Radio
will display ‘Programming mode Progress.....’ and LED will flash orange/green.
Transferring data
Master radio Press the top side function button and top orange button together to initiate
data transfer.
Slave radio The radio’s LED will flash green whilst data transfer is in progress.
Once all the data has successfully transferred the LED will flash orange/green.
To return the radio to normal mode switch the radio off then on again.
The ‘master’ radio will automatically return to ‘clone send’ mode. You may now either
programme another radio or switch radio off then on to return radio to normal.
If an error occurs during data transfer a alert will sound.
23
Radio Cloning HT953
HT953