La Crosse Technology Kcombo5 - Manual (Page 10)

13
* When the signal from the transmitter is successfully received by the
Temperature Station, this icon will be switched on. (If not successful, the
icon will not be shown on the LCD). User can therefore easily see whether
the last reception was successful (“ON” icon) or not (“OFF” icon). On the
other hand, the short blinking of the icon shows that a reception is being
done at that time.
For a better display clarity, the LCD screen is split into 3 sections.
Section 1 - TIME
x Display of time (manually set).
Section 2 - CURRENT INDOOR TEMPERATURE AND MIN/MAX
TEMPERATURE
x Display of indoor temperature.
x Display the indoor MIN/MAX temperature.
14
Minutes (flashing) Hour (flashing)
Section 3 - CURRENT OUTDOOR TEMPERATURE MIN/MAX
TEMPERATURE
x Display the current temperature.
x Display the outdoor MIN/MAX temperature.
MANUAL TIME SETTING:
To manually set the time of the Temperature Station:
1. Press and hold the SET key for 3 seconds to enter the manual
setting mode.
2. The hour digit of the time display will be flashing.
15
3. Press the + key to adjust the hour (press and hold to allow fast
advance). Press SET key to confirm and go to the minute setting.
4. The minute digit will be flashing. Press the + key to adjust the
minute (press and hold to allow fast advance). Press SET key once
more to return to normal display.
Note:
If no buttons are pressed within approximately 8 seconds while in any
setting option, the unit will return to normal operating mode.
VIEWING THE INDOOR TEMPERATURE AND MIN/MAX
The indoor temperature is displayed in the second section of the LCD
along with the indoor MIN/MAX records:
16
Indoor temperature
MIN indoor
temperature
Note:
x
The maximum temperature record for the MIN indoor
temperature can only be up to 99ºF, and the MIN/MAX
temperature resolution is 1
ƱF.
x The resolution of the indoor temperature is 0.5ºF
MAX indoor
temperature