Lencore n.Form: Installation and Operations Manual - Manual (Page 4)

Follow all instructions.
Do not use this equipment near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Protect your equipment with surge protector and UPS equipment.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as if the
power-supply cord or plug is damaged; liquid has been spilled or objects
have fallen into the apparatus; the apparatus has been exposed to rain
or moisture; does not operate normally; or has been dropped.
Follow COMPLETE instructions for wiring the system and ALL system checks
before powering the system on for the first time, to avoid irreversible damage
to the components. Ensure proper polarity for wiring with regard to power,
data and audio output.
Do NOT plug any n.FORM™ devices into a computer or network or like
equipment other than n.FORM™ devices unless specifically asked to do
so in the installation manual.
important
safety instructions
WARNING
To reduce the risk of fire
or electric shock, do not
expose this equipment
to rain or moisture.
Equipment should not be
exposed to dripping or
splashing and no objects
filled with liquids should be
placed on the equipment.
1
2
3
4
5
6
7
8
9
10
1