1 | system components – Lencore n.Form: Installation and Operations Manual User Manual
Page 8
section 2
.05-Power Supply
The Lencore System uses a 36 or 48 Volt DC
power supply unit to power the Emerald OP. The power supply is
connected to the sound source (OP) using 2 conductor, plenum rated
16 gauge wire.
.06-OP
The Emerald Operating Platform (OP) delivers superior
intelligible messaging, doubles the number of speakers from one
operating platform and has four times the number of channels,
compared to the Spectra i.Net® OP – creating coverage up to 6 million
square feet per system.
.07-Auxiliary OP
Lencore’s Auxillary OP provides expansion
capabilities off of the Emerald Operating Platform. The Auxiliary
OP provides an additional 8 channels with up to 8 speakers per
channel, or a total of 64 additional speakers, in order to allow
greater coverage and reach.
2.1 |
system components
5
.04-SmartSwitch
The Lencore SmartSwitch provides total data and
audio redundancy to any n.FORM™ system.