LSC Lighting APS - Manual (Page 16)

Menu System APS
Operator Manual V1.02
Page 12
4.8 IMPORT EXPORT
The configuration settings of an APS can be exported to a SD card allowing them to be
imported and copied to other APS units. Insert an SD card into the front panel slot then
touch the Home Screen, Import Export.
4.9 SYSTEM
4.9.1 Code Upgrade
LSC Lighting Systems has a corporate policy of continuous improvement to its products. The
APS software (firmware) is subject to this policy as new features are added and existing
features improved.
The software version of your APS can be checked by pressing System, About.
To upgrade your APS software, download the latest version from the LSC web site,
www.lsclighting.com and save the new software to an SD Card. The file will be called
APS_V*.BIN where * is the version number.
Touch the Home Screen then touch System, Code Upgrade. Insert the SD card containing
the file into the SD card socket on the front panel then follow the on screen instructions.
4.9.2 Reset
Touching Reset offers two options:
4.9.2.1 Restart
In the unlikely event that the APS fails to respond, the operating system may be restarted so
that the software may initialise and recommence normal operation. Touching Restart will not
affect any of the settings or memory.
4.9.2.2 RESET To Defaults
This will ERASE all memory from the APS and reset to defaults.
4.9.3 Colour Theme
You can choose a colour theme for the touch screen. The choices are:
 Gothic
 Antarctic
 Dawn
4.9.4 About
The About menu shows information about the software, capacity and owner of the APS.
Touching Owner allows you to enter a name for the APS. Users can be prevented from
changing the Owner name by using the Lock menu as described below.
4.9.5 View DMX
Touching View DMX shows the channel levels of the DMX signal connected to the DMX input.