Lumens Technology DC211 - Manual (Page 26)

English - 25
8.13 I would like to pan the live image (PAN)
If you use the remote control or the control panel:
1. Press [PAN] to enter the image pan mode.
2. Press [] or [] or [] or [] to move and view the partial enlarged
images.
3. Press [PAN] to exit the partial enlarged mode.
8.14 I would like to play the slides (Slide Show)
8.14.1 Setting the slide show effect:
1. Press [MENU] on the remote control or control panel to enter the
Setting Menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [] to [Slide Show Effect].
4. Press [] or [] to select image switch mode [Off/Shutter/Right/
Down/Side/Open].
5. Press [MENU] to exit.
8.14.2 Setting delay time
1. Press [MENU] on the remote control or control panel to enter the
Setting Menu.
2. Press [] or [] to select the [Storage] menu.
3. Press [] to enable [Delay].
4. Press [] or [] to select page-flipping time [0.5 Sec/1 Sec/3 Sec/5
Sec/10 Sec/Manual].
5. Press [MENU] to exit.
<Remark>: If the delay time is set to 0.5 sec, then it cannot play slide
show effect.