Lumens Technology DC211 User Manual
Page 28
English - 27
5. Press [] or [] to move the images (captured images only)
leftward/rightward.
6. Press [ZOOM+/-] to zoom in/out the live image
7. Press [PBP] to back to the captured image screen.
8. Press [MENU] to exit.
8.16
I would like to reduce the image noise (Projector
Type)
1. This function enables Document Camera to automatically clear image
noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to
improve the image quality.
2. If there is special noise when VGA out is connected, please set DLP
option to improve the image quality.
3. Press [MENU] on the
remote control or control panel to enter the
setting menu.
4. Press [] or [] to the [Setting] menu.
5. Press [] to enter [Projector Type].
6. Press [] or [] to select
[LCD/DLP].
7. Press [MENU] to exit.
8.17 I would like to resume the factory default settings
(Factory Reset)
1. Press [MENU] on the
remote control or control panel to enter the
Setting Menu.
2. Press [] or [] to access the [Advanced] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [Enter] to activate.