MacroSystem Bogart SE Ver.3 Addition to the manual - Manual (Page 12)

12
Context actions
If you place the mouse pointer over the envelope, you can click
on the small left trackball button to call up a context menu .
Note: If you have a trackball with only two buttons, you should
click in the sound sample menu above and then select „Con-
text-Action“. The mouse pointer will change and you can then
use it to click the left trackball button inside the envelope to
activate the context menu for the envelope.
The table below shows the functions that apply to the envel-
ope and when they are available .
If you want to delete a point, simply select it and then click on
the small left trackball button to open the context menu . There,
you can select „Remove point“ .
A point that has already been colored green can also be delet-
ed via the sample menu . Click on the large left trackball button
and select „Remove active point“ . The green colored point in
the envelope will then be deleted . If you are using a two-button
trackball, this may be more convenient .
Envelope window
Open the sound sample menu by selecting it with the big, left
trackball button . You can then select Envelope in the sound
sample menu .
Envelope
The envelope can be changed directly in each displayed
sample .
While in the timeline mode, the envelope can now be edited
directly in the audio-mix . However, this function is not available
for the lowest screen resolutions (such as Scart) .
Should you wish to insert a point while in this view, you could:
• Click with the large left trackball button on the line of the
envelope, or
• Click on the small left button. This will activate a context
menu in which you should select „Insert point“ . (Please refer
to „context actions“ below) .
A red square will be inserted in this spot. It serves as a set
point . Should you want to move such a point, you should
move the mouse pointer to the icon and then click on the left
trackball button. This selects the red square and its color is
subsequently changed to green.
In order to move, you should click on the green point . It will
now become blue to indicate that you can move it .
Should clipping occur, this will be indicated in red . W While
editing the envelope, the red color changes of the volume line
will indicate where clipping occurs . Of course, this information
is only about the sound sample, not about the overall relation-
ship with the other tracks .
Function Available at… Description
Change volume An existing point Move the point up or down to adjust the volume .
The volume is displayed in the info box . The position
remains unchanged .
Change position An existing point Move the point left or right to change the position in
the sound sample . The position is displayed in the
info box . The volume remains unchanged .
Change position and volume An existing point Move the point in order to modify volume and posi-
tion at the same time .
It is also possible by clicking directly with the big left
trackball button .
Remove point An existing point Deletes a highlighted point .
Remove envelope An existing point, any spot on the envelope Deletes all points (except the start and end points)
of the envelope . This also deletes all settings for the
envelope .
Insert point Any spot on the envelope Inserts a point on the envelope at the location of the
mouse pointer . It is also possible by clicking directly
with the big left trackball button .