MacroSystem Bogart SE Ver.2 User manual - Manual (Page 79)

77 Bogart SE 2 user manual
specific region (usually where it was purchased) . This system
is divided into 6 DVD regions . Europe is region 2; therefore, in
Europe you can only play DVDs on your Casablanca that carry
the region 2 code . The same goes for other regions of course .
Region code 0 can be played anywhere .
Buttons and Help functions
You can operate the DVD player comfortably using the opti-
onal remote control buttons . When using a trackball, you can
activate the DVD menu control anytime using the left trackball
button . Many other functions can be accessed by pressing the
Help menu (press the small left trackball button) . The single
operation controls in the Help menu are as follows:
2.1.4 DVD navigation
Press the Navigation button to enter the Navigation options .
They consist of the following:
1) Chapter selection
Press button 1 to choose which chapter for playback . The
possible number of chapters is shown by the right figure . For
example, `2 of 5´ means that you are currently selecting the
second of five available chapters . `1 of 1´ means that there
is no chapter selection available . Enter a single or two figure
number using the remote or type the number using the number
pad on the screen (via trackball) . Confirm with OK . The menu
will close; the Navigation options too will disappear .
2) Menu selection
This allows you to directly access the menus on the DVD (for
example the title and main menu .
3) Time access
This prompts a small area for entering the time . Use the
remote‘s number block or use the trackball to click into the
area and then enter the numbers . This is used if you want to
access a certain point on the DVD directly, for example enter
45 to jump to the 45th minute .
finished analyzing and the required playback program of the
software will be launched .
2.1.2. Audio CD, Photo CD, File CD/DVD/Blu-ray
Once the system recognizes the audio CD format, playback
begins shortly . If you have played the CD on your Casablanca
system before, the Media Manager will ask you if you wish to
continue listening from the last position or if you want to start
the CD from the beginning . You can use the P+ and P- buttons
to skip the tracks .
A photo CD automatically jumps to the photo archive section
of the software . You will instantly see the photos listed and can
start the slide show . Use the Options button or the trackball
help button to configure automatic repeat or random playback
of the photos .
If you have varying audio and video formats on the disc, a list
will appear showing all files . Press the `Info´ button to get more
information about the file . Behind the file name, the system
displays the format type and running time .
2.1.3 Playing a Video DVD / Mini DVD
A disc carrying video data (either a video DVD or a CD with
Video DVD contents, often called cDVD or Mini DVD) will start
playing automatically . If you have played the disc on your Cas-
ablanca system before, the Media Manager will ask you if you
wish to continue listening from the last position or if you want
to start the disc from the beginning . If the DVD begins with a
menu, use the direction buttons on the remote to navigate the
options and start the film . When using a trackball only, press
the left trackball button to show the controls .
If you want to start the film directly, press the Play or Ok but-
ton in the DVD menu .
Note: Depending on the system, playback of copy protected
DVDs may only be possible with add-on software . However,
even so, such discs may result in unusual behaviour .
General information about Region Codes:
DVDs carry a code that allows the disc to be played in a