Marantz SR6006 - Manual (Page 107)

104
AUDIO/VIDEO ADJUST
M-DAX
Default settings are underlined.
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the
amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX
function generates the signals eliminated upon compression, restoring the sound to conditions near those
of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer
sound with compressed audio signals.
Setting details
OFF : Do not use M-DAX.
Low : Optimized mode for compressed sources with very weak highs.
Middle : Apply suitable bass and treble boost for all compressed sources.
High : Optimized mode for compressed sources with normal highs.
• This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input.
• “M-DAX” settings are stored for each input source.
• When set to “OFF”, the M-DAX indicator on the front panel switches off.
• This cannot be set when the surround mode is set to “DIRECT” or “PURE
DIRECT”.
• Buttons on the remote control unit can be used for operations.
q Press AMP to set the remote control unit to AMP-operation mode.
w Press M-DAX .
• If M-DAX on the main unit is pressed, the same function as with the remote
control unit can be obtained.
Audio Delay
Default settings are underlined.
While viewing video, manually adjust the time to delay audio output.
Setting details
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( vpage 109 ) is set to
“ON” and when a TV compatible with Auto Lip Sync is connected.
• Store “Audio Delay” for each input source.
• Audio Delay for game mode can be set when “Video Mode” (
vpage 94 ) is set to “Auto” or
“Game”.
Picture Adjust
Default settings are underlined.
Picture quality can be adjusted.
• This item can be set when the input source is BD DVD VCR SAT GAME AUX1 AUX2
NET/USB .
• With input sources other than the ones above, this item can be set when “Video Select” is selected. In
this case, the original input source settings are called out.
• Can be set when the “Video Convert” setting ( vpage 95 ) is “ON”.
• “GAME”, “AUX2” or “TV” can be set when “HDMI” ( vpage 93 ) or “COMP” ( vpage 94 ) has
been assigned.
Setting items Setting details
Contrast
Adjust picture contrast. –6 – +6 (0)
Brightness
Adjust picture brightness. 0 – +12
Chroma Level
Adjust picture chroma level
(saturation). –6 – +6 (0)
Hue
Adjust color hue. –6 – +6 (0)
DNR
Reduce overall picture
noise. OFF / Low / Middle / High
Enhancer
Emphasize picture contours. 0 – +12
• “DNR” and “Enhancer” are each effective with HDMI output.
• The value set at “Picture Adjust” is stored in the memory individually for each input source.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
A
dv
anced v
ersion
BD