Specifications – Marantz SR6006 User Manual
Page 154
151
Specifications
n Audio section
• Power amplifier
Rated output:
Front:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Maximum effective output power:
Front:
190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Center:
190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround:
190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Surround back:
190 W + 190 W (6 Ω, 1 kHz with 10 % T.H.D.)
Output connectors:
6 – 8 Ω (SPEAKER A+B: 8 Ω)
• Analog
Input sensitivity/Input impedance:
200 mV/47 kΩ
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
100 dB (IHF–A weighted, DIRECT mode)
Distortion:
0.005 % (20 Hz – 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output:
150 mV
Distortion factor:
0.03 % (1 kHz, 3 V)
n Video section
• Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω
Frequency response:
5 Hz – 10 MHz — 0, –3 dB (when “Video Convert” set to “OFF”)
• Color component video connector
Input/output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω
P
B
/ C
B
signal — 0.7 Vp-p, 75 Ω
P
R
/ C
R
signal — 0.7 Vp-p, 75 Ω
Frequency response:
5 Hz – 60 MHz — 0, –3 dB (when “Video Convert” set to “OFF”)
n Tuner section
[FM]
[AM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz – 107.9 MHz
530 kHz – 1710 kHz
Usable Sensitivity:
1.5 μV (14.8 dBf)
20 μV
S/N:
MONO 78 dB (IHF–A weighted, DIRECT mode)
STEREO 68 dB (IHF–A weighted, DIRECT mode)
HD
85 dB
85 dB
Total harmonic Distortion (at 1 kHz):
MONO 0.1 %
STEREO 0.2 %
HD
0.02 %
0.02 %
n General
Power supply:
AC 120 V, 60 Hz
Power consumption:
650 W
0.2 W (Standby)
2.2 W (CEC standby)
For purposes of improvement, specifications and design are subject to change without notice.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Inf
or
mation