Cables used for connections – Marantz SR6006 User Manual
Page 11
8
Connecting an HDMI-compatible device
OUT
HDMI
GFront panelH
Digital
camcorder
• When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an
HDMI cable.
• When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High
Speed HDMI cable with Ethernet”.
• Video signals are not output if the input video signals do not match the monitor’s resolution. In this case,
switch the Blu-ray Disc/DVD player’s resolution to a resolution with which the monitor is compatible.
• When this unit and monitor are connected with an HDMI cable, if the monitor is not compatible with
HDMI audio signal playback, only the video signals are output to the monitor.
NOTE
• When you use the HDMI control function, set “HDMI Control” – “Control” (
) to “ON” and
set the HDMI MONITOR connector that you want to operate by the HDMI control function in “Control
Monitor”.
• The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be
limited by the HDMI audio specifications of the connected device regarding permissible inputs.
• The front panel HDMI input connector is displayed as “HDMI7” in the “Input Assign” (
)
in the menu.
Cables used for connections
Audio and video cable (sold separately)
HDMI cable
• This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.
OUT
HDMI
OUT
HDMI
OUT
HDMI
OUT
HDMI
OUT
HDMI
OUT
HDMI
IN
HDMI
IN
HDMI
Blu-ray
Disc
player
DVD
player
TV 1
TV 2
Set-top
box
Game
console
Digital
camcorder 2
Video
cassette
recorder
GRear panelH
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
vSee overleaf