Marantz PM-15S2 - Manual (Page 17)

11
ENGLISH
NAMES AND FUNCTIONS
BASIC CONNECTIONS
BASIC OPERA
TIONS
ADV
ANCED CONNECTIONS
ADV
ANCED OPERA
TIONS
TROUBLESHOOTING
OTHERS
BASIC OPERA
TIONS
BASIC OPERATIONS
7
Volume Adjustment
Adjust the volume as desired with the VOLUME knob on
the front panel or the VOLUME
3 or 4 button on the remote
controller.
VOLUME
DISPLAY ATT -
VOLUME knob
VOLUME 34
buttons
To increase volume, turn the VOLUME knob clockwise or press
the VOLUME
3 button on the remote controller.
To decrease volume, turn the VOLUME knob counterclockwise
or press the VOLUME
4 button on the remote controller.
When the VOLUME knob on the front panel is turned slowly,
the volume can be fine-adjusted in 0.5 dB steps, whereas when
it is turned rapidly, the volume level changes greatly.
7
Tone Adjustment
According to your preference and acoustic conditions of the
room, the bass and treble tones can be adjusted.
BASS TREBLE
TONE button Tone control knobs
L
TRIM
PHONO CD BALANCED
RECORDER 1 LINE 1
RECORDER 2 LINE 2
EXIT TONE
ENTER
DISPLAY ATT
+
-
R
TONE button
Before adjusting the tone, press the TONE button on the front
panel or on the remote controller to set it to ON.
For bass tone adjustment, turn the BASS control knob.
For treble tone adjustment, turn the TREBLE control knob.
7
Attenuating the Volume Level
Temporarily
The volume level from the speakers can be temporarily
attenuated.
L
VOLUME
ENTER
DISPLAY ATT -
R
ATT button
ATT button
1. Press the ATT button on the front panel or on the remote
controller to attenuate the output volume level.
2. Press the ATT button on the front panel or on the remote
controller again to cancel attenuation.
For details on How to Set Attenuation Level, see page
19.
PM-15S2_UN_01_Eng.indd 11 PM-15S2_UN_01_Eng.indd 11 09.5.18 2:57:01 PM 09.5.18 2:57:01 PM