Phono, Error messages, Troubleshooting – Marantz PM-15S2 User Manual

Page 28

Advertising
background image

22

ENGLISH

NAMES AND FUNCTIONS

BASIC CONNECTIONS

BASIC OPERA

TIONS

ADV

ANCED CONNECTIONS

ADV

ANCED OPERA

TIONS

TROUBLESHOOTING

OTHERS

TROUBLESHOOTING

TROUBLESHOOTING

PHONO

Symptom

Cause

Solution

Page

Noise occurs during record
playing. Or, no sound is
heard.

Grounding connection from the record
player is improper.

Check that the grounding wire of the
record player is connected with the
PHONO GND terminal of this unit.

8

Connection to the PHONO IN jacks is
incomplete.

Check that the output jacks of the record
player are properly connected with the
PHONO IN jacks of this unit.

8

A TV set, etc. placed too close to the
record player may affect the sound.

Place the TV set or record player in
another position.

The PHONO MC button is not set
properly for the cartridge used.

When the MC cartridge is used, set the
PHONO MC button to MC.

4

Howling occurs when
sound volume is increased
during record playing.

The record player and speakers are
placed too close.

Place the speakers as far away from the
record player as possible.

The record player is placed on a rack or
floor prone to vibration.

If an insulating pad is not supplied with
the record player, use an insulating pad
available on the market.

ERROR MESSAGES

Symptom

Cause

Solution

Page

An error message is
displayed.

The F.C.B.S setting is improper.

Set the ID numbers for F.C.B.S
connection properly.

17

The protection circuit has been activated.

See “ABOUT THE PROTECTION
CIRCUIT”.

23

PM-15S2_UN_01_Eng.indd 22

PM-15S2_UN_01_Eng.indd 22

09.5.18 2:57:04 PM

09.5.18 2:57:04 PM

Advertising
This manual is related to the following products: