MBM Corporation AJ 700 - Manual (Page 4)

4
Danger
Apply the power supply of the designated
voltage, and independently use the wall outlet
with a proper rated current specified in the
serial plate.
If the outlet is used concurrently with other
equipment, the branched part of the outlet could
overheat and cause fire.
If dust is on prongs or prong fitting part of the
power plug, wipe the dust off with a dry cloth.
It may cause fire.
Should any foreign substance, such as metal,
water, etc., get inside the machine, be sure to
turn off the power first, and then disconnect
the power plug from the outlet.
If the machine is used as it is, it may cause fire or
an electrical shock.
Contact your dealer immediately.
Do not do anything that may damage the
power cord or power plug.
(Do not scratch, process, forcibly bend, twist, or pull
it, or place heavy object on it, or bundle it.)
Doing so could cause a fire or an electrical shock.
When disconnecting the power plug from the
outlet, be sure to grip the plug itself.
Pulling the power cord may damage the cord,
which could cause a fire or an electrical shock.
Do not unplug the power plug with wet hands.
It may cause an electrical shock.
Be sure to turn off the power first and pull the
power plug from the outlet when cleaning the
machine.
The machine may be operated by mistake, causing
a bodily injury.
Be sure to connect a ground wire.
If an electric leak occurs, it may cause fire or an
electrical shock.
Caution
When the jogger will not be used for several
days, such as during consecutive holidays,
etc., be sure to unplug the power cord from
the outlet for safety’s sake.
Due to deteriorated insulation, it may cause an
electric fire.
Place the machine on a level and stable table
or floor with enough space,
otherwise the machine may fall, which could result
in bodily injury.
Do not place the machine in a humid place or
where it could get wet.
Doing so could cause the insulation to deteriorate
and cause an electrical shock or fire.
Be sure to remove the power plug from the
outlet when moving the machine,
otherwise it may damage the cord, causing fire or
an injury.