MBM Corporation AJ 700 - Manual (Page 7)

7
3-2 Operation Panel
① ② ③ ④
⑤
⑥ ⑦
No. Name Function
①
Power switch
(Cont/OFF/Foot Operation)
If “Cont” is set, by stepping on the foot pedal, continuous operation can
be switched between on and off.
If “Foot” is set, the power is on and only when the foot pedal is stepped
on, the machine operates, and the timer adjustment knob can be used.
Note: When the job is finished or suspended, be sure to set “OFF”
in the middle position.
② JOGGER switch When “ON” is set, the paper tray jogs.
③ Air adjustment knob
As it is turned clockwise, the air gets stronger, and when it is turned
counterclockwise to the extreme, “OFF” is set.
④ Timer adjustment knob
Jogging from 0 to about 60 seconds as well as air operation time can be
adjusted.
⑤ Breaker 1 (5A) When the circuit for jogger has abnormal, the fuse blows.
⑥ Breaker 2 (10A) When the circuit for air is abnormal, the fuse blows.
⑦ TIMER switch
When the switch is set to “OFF”, the timer adjustment knob will not work.
When the switch is “ON”, it works.
If the foot pedal is stepped on once, air and jogger will stop when the
set time has expired.
If the foot pedal is continuously stepped on, air only will stop when
the set time has expired.