MBM Corporation AEROCUT - Manual (Page 10)

(3) Installation
1. The machine installation method
Unlock
Lock
Please be sure to LOCK a caster brake after making it move to the target position, when
installing a machine.
Caution
When you install a machine, please install to a place with no dust,
and the place which is not influenced with a liquid. It becomes the
cause of failure if the installation method is mistaken.
2. Setting of feed table
Insert the feed table to the paper feeder, and set the feed table’s slotted holes onto the
protruding bolts on the machine. Install the 2 screws as shown below.
Feed table
Protrusions
(M6x10)
Screws
９