2) if paper scrap remains on the machine, Caution, Power it off. otherwise – MBM Corporation AEROCUT User Manual
Page 29: Injury could occur
(2) If Paper scrap remains on the machine
① If paper scrap remains behind Stacker panel.
If paper scraps remain in the Crease part of machinery, turn off the machine and open the
stacker panel by removing thumb screw on both sides of the Stacker Panel. Pick up paper
scraps with
Tweezers and take them away.
Stacker panel
Thumb screws
② If the paper scrap remains under cutter cover.
If Paper scrap remains under the Cutter cover of the machine, turn off the machine and take
off thumb screw to remove the anti-static brush setting plate. After removing plate there will
be a space. Push the paper scrap down with Waste ejector, which comes with machine.
Waste ejector
Anti-static Brush Setting Plate
Thumb screws
Cutter cover
Caution
Power it off. Otherwise,
Injury could occur.
２８