MBM Corporation Paper Drill 200 single spindle User Manual
MBM Corporation Equipment
Advertising
Due to possible damage in shipping, the vertical stop assembly has been
removed from this machine.
To assemble, insert the threaded rod through the shroud opening in the top of
the machine. Start the four pronged lock knob onto the threaded rod and screw
this assembly into the top of the upright.
Depress the machine handle until the drill bit is slightly above the table and
screw the vertical stop assembly until it stops or moves the handle.
Adjust as instructed in the instruction book under “Operating Instructions,”
Section 3.
Advertising