MBM Corporation Paper Drill 200 single spindle User Manual
Page 6
6
ILLUSTRATION #4
5. As in Illustration No. 3, install the paper side stops (B) to the table by inserting two paper side stop
knobs through the slots of the paper side stops and screwing them into two of the three holes in the
table located in front of the drill strip (C). The location will depend on the size of the product being
drilled.
6. Attach the chip bag to the machine by stretching the mouth of the bag over the Chip Chute Assembly
(H) (Illustration No.4) and hooking it over the chip bag bracket (G).
7. Making sure nothing is interfering with the drill bit, plug the cord set into a grounded 1l0v outlet. To
turn the machine on, press the rectangular switch on the front of the shroud. When the machine is
operating, this switch will be lit.
Your Model 200 Paper Drill is now ready for use. With proper operation and maintenance, it will
give you trouble free operation for years.